- +86 15274842581
- +86 15274842581
- evan@commmesh.com
- +86 15274842581
Do you need a trustworthy fiber connection? This LC UPC to SC APC single-mode simplex patch cord connects different networking equipment. You receive minimal signal loss. A 9/125µm core guarantees effective data transfer. Running at 1310nm, the cable ensures wide compatibility.
Also, a 0.2dB insertion loss maintains top performance. This fiber optic assembly has a tight-buffered cable with a small form factor. The outer diameter measures 3mm.
A standard 1-meter cord length is featured. Further, a duplex configuration supports separate transmission lines. Plus, wavelength tolerance is +/-20nm, showing high flexibility.
Using a simplex design, this cable is good for a single connection. A 900µm buffer is included. 100N tensile strength indicate how sturdy the cable is. Operating range spans -40°C to 75°C.
Our LC UPC to SC APC cable has a 9/125µm single-mode fiber core. A slim 9µm diameter permits just one light path, which lessens modal dispersion. This cable assembly guarantees your data remains intact over long distances. Besides, the 125µm cladding diameter guides light correctly.
A refractive index differential of 1% is perfect. You obtain better transmission speeds. As well, a numerical aperture of 0.14 is offered. An acrylate coating, 250µm thick, is used. The product backs 10Gbps data speeds. This LC UPC to SC APC cable fulfills ITU-T G.652.D standards. Its mode field diameter measures 9.2µm.
The LC UPC to SC APC cable’s outer jacket is polyvinyl chloride. Safety is increased with the use of a low smoke, zero halogen material. This covering defends internal fibers. Moreover, the jacket provides fire resistance, and a 3.0mm diameter confirms durability. Since the material is UV-stabilized, it prevents degradation. Therefore, you are getting a product which lasts longer.
Furthermore, the minimum bend radius measures 30mm. The crush resistance measures 500 N/100mm. The cable has 2.0mm subunits. Each one holds aramid yarn reinforcement. You can anticipate a cable weight of 9 kg/km, assuring flexibility. Likewise, it features a tensile load rating of 600N, and jacket flex cycles surpass 5000.
You will see that our LC UPC to SC APC cable uses zirconia ceramic ferrules. The LC connector has a 1.25mm ferrule. Meanwhile, the SC side holds a 2.5mm part. These parts fight rust, thereby extending the lifespan. A thermal expansion coefficient of 10.6 x 10^-6/°C provides stable performance.
In addition, a modulus of elasticity of 210 GPa proves strong physical integrity. The ferrule’s concentricity error is under 1.0µm, assuring accurate fiber core alignment. Displaying a hardness of 1200 HV, these parts are very durable. They show an end-face geometry meeting industry rules. Each part offers a radius of curvature of 10-25mm.
This LC UPC to SC APC cable employs phosphor bronze alignment sleeves. These parts guarantee ideal connector mating, and these sleeves keep fiber cores in contact. You can count on low signal loss.
A sleeve withdrawal force of 2.9N is expected. Operating in temperatures from -40 to 85 degrees Celsius, each element has a split design. While alignment precision is within 0.2µm, the devices ensure insertion loss change stays under 0.1dB. They can withstand 1000 mating cycles.
Constructed with zirconia, the parts decrease wear. Thus, the SC connector has a retention force above 200N, avoiding accidental disconnection. The LC connector’s retention force measures 68N.
| Parameter | LC Connector | SC Connector | Fiber Spec | Jacket | Performance | Environmental |
| Connector Type | LC | SC | OS2 Single Mode | PVC, LSZH | IL: 0.2 dB | Temp: -40 to 75°C |
| Polish Type | UPC | APC | 9/125 µm | 3.0 mm OD | RL: >50 dB (UPC) | Humidity: 95% RH |
| Ferrule (mm) | 1.25 | 2.5 | 0.14 NA | UV Stabilized | RL: >65 dB (APC) | RoHS, REACH |
| Wavelength (nm) | 1310, 1550 | 1310, 1550 | +/- 20 Tol. | 9 kg/km | 10 Gbps Data | Storage: -40 to 85°C |
| Sleeve Material | Phosphor Bronze | Phosphor Bronze | ITU-T G.652.D | 5000 Flex | 0.6 µm Error | Vibration: 10-55 Hz |
| Retention Force (N) | 68 | 200 | 1260 nm Cutoff | Fire Retardant | 500 mW Power | Altitude: 5000 m |
| Geometry/ Curvature | 10-25 mm | 5-12 mm | 0.2 ps/sqrt(km) | 30 mm bend | 10^-12 BER | IP Rating: IP52 |
This LC UPC to SC APC patch cord utilizes OS2 single-mode fiber. The OS2 type is made for long-range transmissions. You receive best results at 1310nm and 1550nm wavelengths. Although chromatic dispersion is under 3.5 ps/(nm*km) at 1310nm, the cable handles distances beyond 10 kilometers. Attenuation is under 0.4 dB/km. Also, this LC UPC to SC APC cable's polarization mode dispersion is at most 0.2 ps/sqrt(km). Core-cladding concentricity error measures 0.6µm. Cladding non-circularity is below 1%. Because the fiber cut-off wavelength measures 1260nm, the jacket color coding follows TIA-598-C. Maximum optical power handling is 500mW.
The SC end of our LC UPC to SC APC cable presents an APC polish. The angled physical contact reduces back reflections. You gain from a return loss over 60dB. This polish is an 8-degree angle cut, which is great for high-bandwidth uses. Moreover, this finish lessens Fresnel reflection. The apex offset is under 50µm. The fiber undercut measures 50nm. The connector's end-face radius is between 5 and 12mm. Because this SC/APC connector meets IEC 61755-3-2 standards, it ensures compatibility. Its back reflection is -65dB, and it uses an angled ferrule polishing method, decreasing signal disruption.
The LC end on this LC UPC to SC APC cable features a UPC polish, and it supplies a return loss surpassing 50dB. The ultra physical contact design guarantees direct fiber core contact. Also, the end face has a convex form. This is great for jobs needing low signal loss. The radius of curvature ranges from 10 to 25mm. You get improved signal clarity. Since the apex offset stays below 50µm, it results in exact alignment, and the fiber protrusion height is kept to 50nm. This connector meets Telecordia GR-326-CORE rules. The back reflection is -55dB, showing dependable performance.
This LC UPC to SC APC cable assembly offers minimal back reflection. The APC connector assures a return loss exceeding -65dB. Also, the UPC connector provides a return loss greater than -55dB, which is important for delicate optical systems. You get better signal quality. The lessened back reflection cuts signal noise. This low reflection improves network operation. Additionally, the cable provides for a top bit error rate of 10^-12 in order to ensure data correctness. Made for use in temperatures ranging from -20 to 60 degrees Celsius, it promises to remain performing consistent. Additionally, it delivers a bandwidth of 10 GHz.
To save your time, please contact us quickly via the form below to get an instant quote.
