• +86 15274842581
  • +86 15274842581
  • evan@commmesh.com
  • +86 15274842581
Main Menu
quick quote
ST connector

China Cheap Fiber Optic ST Connector Wholesale

You need a reliable fiber connection. The ST connector provides secure links. It uses a 125µm cladding diameter. Observe its 2.5 mm O.D. zirconia element. This has a 0.9µm tight buffer design.

Its features contain nickel body parts. Note the 8-32 UNEF thread. The product ensures 0.2dB insertion loss. See the 500 Mating Cycles component. It works in -40°C to 85°C environments.

You get a 9/125 core. Look at the Ø0.25mm aperture size. It presents 15 N tensile strength. Observe its simplex configuration setup. Note its 1310nm to 1550nm range.

The spring-loaded mechanism can be used by you. The housing measures 2.6mm. Notice its outer element length, 46.5 mm. This exhibits a twist-lock mount.

quote now

Understanding ST Connector Technology!

· Bayonet Coupling

Keep in mind what you need from a secure connection at first. This ST connector utilizes a special twist mechanism. Observe its two pins, each 0.5mm. Notice these move within two slots. These are 1mm wide each. The locking force equals 20 pounds. This ensures strong fiber optic links. These are used on patch panels.

· 2.5mm Ferrule

This ST connector uses a precise element. It is made from an engineered material. It is 10 millimeters in length. The outside diameter is 2.499 millimeters. Note its internal hole. It holds fibers tightly. This enables data transfer on modules. You find these in electronic equipment.

· Multimode Fiber

The ST connector is perfect for various light paths. A glass core has 50-micron width. This permits different signals to journey. It has a jacket measuring 3 millimeters. They link devices. The typical data rate is 1 gigabit per second. You connect devices within 550 meters.

· Singlemode Fiber

Utilize this ST connector type to transmit one light path. Its thin 9-micron core enables focused signals. The component functions well within 10-kilometer distances. This is valuable for telecommunications. Your data rates will exceed 10 gigabits. They are common for data center backbone or distribution frame.

· Simplex/Duplex

Choose the ST connector style from the link. One channel uses a simplex model. It sends data in a single direction. For a two-way communication, choose duplex. The form needs two fibers, side by side. The duplex design uses 6.4-millimeter by 3.2-millimeter size.

Technical Parameters

Optimizing ST Connector Installation!

Epoxy Application
Epoxy application needs a 10:1 adhesive ratio mix. You will need a 23-gauge needle here. Inject 0.5 cc into the ferrule’s space. Plus, keep viscosity at 3000-centipoise. Keep the temperature at 25 degrees Celsius. Additionally, a 30-minute pot life is important. The index should be 1.5 now. Achieve accuracy using the tip. An ST connector needs this step. Maintain the storage range from 20 to 27 degrees Celsius. You must observe the bond line is 5µm thick.
Curing Process
Curing process uses an oven at 100 degrees Celsius. You must heat for 5 minutes. While, maintain uniformity within 2 degrees. Natural convection is used. Afterward, cool at 5 degrees per minute. Meanwhile, use a 1-second timer. Keep humidity below 30%. Thus, check ferrule temperature with a thermometer. Remove after reaching below 40 degrees. Finally, you need to confirm no residue remains, visually.
Polishing Techniques
Polishing techniques start with a secure connector holder. Use 5µm grit film, initially. Apply 10 strokes with 10 Newtons. Afterwards you’ll use a figure eight motion. You need to keep a 15-degree angle. Switch to a 1µm lapping film. Consequently, repeat with 0.3µm sheets. View at 200x magnification. Cleaning with alcohol is next. For, the roughness should stay under 0.05µm. This is for the ST connector.

ST Connector Maintenance and Care!

Cleaning Protocols

Cleaning regularly is important for best use. You should use a special cleaning swab for the fiber's tip. The swab should have 99% isopropyl alcohol. The ferrule end-face is 2.5mm. So, wipe the ST connector tip once, gently removing any dirt.

Dust Cap Usage

Dust caps should always be on when not in use. Caps are about 5mm wide. Also, the cap protects the shiny part. But, put a new cap on if it is broken. Since, hands off the shiny tip!

Proper Handling

Handling the connector body is the best way to hold it. Because the body is about 46.5mm long. For instance, never touch the end part. As well as, keep unused ones in a clean, dry spot with an anti-static bag.

Inspection Intervals

Inspecting for damage is something to do now and then. While the bayonet needs to work smoothly, its locking force is 20 pounds. Furthermore, look at the fiber tip for scratches, using a special tool. Then, if worn out, get a new ST connector; ensuring good signals.

FAQs!

These connectors join multimode links, commonly in local area networks, or security systems, that require data transmissions up to 100 megabits. Devices might include transceivers, utilizing 850-nanometer light, with Numerical Aperture values of 0.275. This type, with a 2.5-millimeter ferrule, assures connections with less than 0.25-decibel losses in signals.
An Straight Tip uses a bayonet mechanism, engaging a 2.5-millimeter tip with a twist lock. The Subscriber type utilizes a push-pull engagement. This connector has a square housing, which measures 2.5 millimeters and provides a click. The other mechanism has ceramic ferrules, while different variations have plastic ones.
They’re used in industrial situations where they need to last despite vibrations. These are in facilities with devices having fiber distributed data interface ports. Factories use them for joining simplex cables. This supports networks, and their physical contact ends ensure less than -20 decibels reflection, maintaining a 2.5-millimeter profile.
This connector offers secure links due to its design, which prevents disconnections in places with motion. A ceramic ferrule with a diameter of 2.499 millimeters guarantees fiber alignment, with correspondingly low losses. Facilities, with needs of high vibration, use these connectors, rated for 500 mating cycles, ensuring less than 0.2-decibel change.
First, prepare your fiber by stripping it, exposing 1 inch. Next, inject a mix of epoxy, using 0.5 milliliters for adhesion. Make sure to snug the fiber inside. And heat at 200 degrees for 4 minutes. Finally, polish end to give a smooth surface allowing passage of light.
It is square and is made for dense packing. It measures 9 millimeters, high by 26 in length, including its strain relief. It has a 2.5-millimeter ceramic ferrule. The proper alignment is assured by its design, with only less than 0.1 decibels of loss. The profile allows easy engagement in tight spaces, commonly in telecommunication networks.

Related products

we will assist you 24/7

Quick Contact

Let's start a quick conversation

To save your time, please contact us quickly via the form below to get an instant quote.

 
icon